Quality Box Welded Pond Liner, 1.00mm EPDM Box Welded Liner 1m L x 0.9m W x 0.6m D with 15cm Overlap

QUALITY BOX WELDED POND LINER 

Our box welded liners are the perfect solution for formal, ornamental, swimming, or Koi ponds where the sides of the pond are vertical and the base is flat. Every one of our box welded liners is prefabricated, to your bespoke requirements. Known as fish pond liners, box welded to individual shapes, a box pond liner can be the perfect solution for your pond in your garden.

WHY SHOULD I CHOOSE A MADE TO MEASURE, BESPOKE LINER? For formal ponds, either above or below ground, a tailor-made pond liner will fit the exact dimensions of your pond. When the liner is delivered to you, you simply unfold it and slip it snugly into place, it’s very quick and easy to install. A simple fish pond liner is an alternative to the standard liner. Once in the pond, box welded liners do not have any unsightly folds or creases that need to be hidden, as you would if using a flat sheet liner. Box-welded pond liners are also manufactured with a flange around the top that can be laid under paving flags to secure the top of the liner. All our tailored liners are made from 0.75mm or 1.00mm SealEco EPDM and heat welded (vulcanised) to ensure maximum strength and endurance of the liner.

ARE BOX-WELDED LINERS SUITABLE FOR KOI PONDS? Yes! Using a bespoke liner in a formally shaped pond provides the perfect habitat for Koi and other larger fish varieties because the whole area of the pond has a greater depth compared to a natural pond, which will get shallower near the edges. The SealEco EPDM that we use for all our made-to-measure liners is certified non-toxic, so it will have no impact on any Koi, other aquatic life, or plants you choose to put in your pond. It is also unaffected by UV, temperature fluctuations, or frost, so you can be safe in the knowledge that your liner won’t become brittle or crack.

ARE BOX-WELDED LINERS EXPENSIVE?  Box welded liners do cost more than a flat sheet liner because they take additional fabrication time to weld the joints, but they are not as expensive as you might think. 

Available in other sizes, please contact us for a bespoke pond. 

Everything from simple circular or rectangular shapes right up to ponds with multiple steps, varying wall angles, and separate sections. In order to supply the best liner for you, every liner is tailored to fit your requirements. For simple shapes, you can provide the measurements for the length, width, and depth required. For more complicated designs, a drawing or template may be required to ensure the liner is customised to fit. Where you have multiple connected formal ponds or rills, we can supply each section as a separate box liner that would be joined together on site. To get the best out of your bespoke liner, we would recommend that all pond or lake liners be installed with a good quality pond underlay to provide protection from stones and roots. We supply AquaSHIELD protective matting in both 200gsm and 275gsm.